- Upgraded PXIe Labview from 2012 f3 to 2013 f2
- Use 2013 DS-2 developer suite distribution, August 2013 release
- 3 DVDs for LV/CVI etc
- 1 DVD device drivers
- 1 DVD additional FPGA/xilink tools
- 2+ hours to run
- share DVD from Matrix-Auger to Auger-pxi
- After upgrade somehow initial daqmx diver install not completed, so projects with analog io were broken
- download and install DAQmx 9.8
- now analog works but cRIO still broken, missing "software or license"
- another hour...
- Download NIRIO130 driver and install
- now cRIO recognized, but software conflict
- use NI MAX remote system/software/Add remove to replace LV 12 environment with LV 13
- now VIs resident on cRIO work, but error from FPGA
- another hour+...
- NI MAX never recognized PXIe 4132 SMU
- needs separate driver, NIDCPWR190
- another GB download and install, almost an hour...
- now SMUs are recognized
- Rebuild FPGA
- go to cRIO/chassis/FPGA target
- rebuild FPGA counter to DAC using existing build spec
- 40 minutes elapsed, no errors
- RT_Omicron.vi still fails, error on FPGA Target RIO0
- Unplug cRIO, try again, now it works, for some reason new bitfiles not downloaded
- communication now OK, Omicron FPGA interface 2.lvproj now works
Now all projects in PXIe Documents/Programs LV seem to work with 2013. "LV 2012 backups" folder has old versions
No comments:
Post a Comment